Northern Industrial Reconditioned MIG/Stick 200 Welder

This Northern Industrial MIG/Stick 200 welder features a lightweight, powerful inverter design and the versatility to weld up to 5/16in. materials. This welder is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that meets the same standards and quality as new products, yet give you identical features at considerable savings. This welder is warranted for 90 days parts and labor, with Service Protection Plan available. Volts: 230, Amps: 140 / 200, Duty Cycle: 30% at 160 Amps, Mig Ready: Yes, Wire Feed Speed Control: Infinite, Weldable Metals: MIG (steel, stainless steel, aluminum) Stick (steel, stainless steel, hard surfacing, cast iron), Weld Thickness (in.): 5/16, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Dual gauge, Shielding Gas Required: For MIG Welding, Welding Wire Diameter (in.): .023 and .035, solid and flux core wire, Power Cord (ft.): 6, Cart: No, Dimensions L x W x H (in.): 18 x 9 1/2 x 13 1/2 10-ft.... [Read more]

Brand: Northern Industrial Welders

Northern Industrial 125 Flux Core Welder - With Bonus Kit

This Northern Industrial Welders 125 flux core welder is capable of welding 18-gauge up to 3/16in. mild steel for light industrial applications. It provides a rated output of 80 Amps @ 115V DC, 20% duty cycle and uses AC single phase (110/120V) power. Bonus kit includes MIG pliers, 2 mini magnets, leather apron and How-To DVD Volts: 115, Amps: 30-125, Duty Cycle: 20% 80 Amps, Wire Feed Speed Control: Infinite, Weldable Metals: Mild steel, Weld Thickness (in.): 18-gauge to 3/16in. steel, Clamp Cable Length (ft.): 6.5, Welding Wire Diameter (in.): .030 and .035, Power Cord (ft.): 6.5, Cart: No, Dimensions L x W x H (in.): 18 x 10 x 12 Welds 18-gauge up to 3/16in. mild steel for light industrial applications Use with flux core welding only Rated output 80 Amps @ 115V DC, 20% duty cycle Uses AC single phase (110/120V), 60 Hz/20 Amp with time-delayed fuse and circuit breaker Trigger-activated arc for electrically cold wire when not welding Two heat settings, infinite wire speed control, ... [Read more]

Brand: Northern Industrial Welders

Northern Industrial Welders Welding Cabinet - MIG and Stick Welding

This Northern Industrial Welders Welding Cabinet provides a cost-effective solution for portable MIG and stick welding and plasma cutting operations. Includes a drawer for small accessories, a second for helmets, along with a hanger for cables and a back panel cylinder holder that is designed for 7 1/2in. dia. cylinders. Capacity (lbs.): 150, Tire Size (in.): 6, Tire Type: Rubber solid caster, Depth (in.): 1.5, Dimensions L x H (in.): 33.2 x 25.5 Includes a drawer for small accessories, a second for helmets Hanger for cables Back panel cylinder holder designed for 7 1/2in. dia. cylinders Rolls on 6in. rubber solid casters 33.2in.L x 18.5in.W x 25.5in.H [Read more]

Brand: Northern Industrial Welders

Northern Industrial Replacement Diffusers for Plasma Cutter (Item# 164610) - 2-Pk, Model# 2.07.42.010

Northern Industrial replacement diffusers work with the Northern Industrial Plasma Cutter Model 375, Item# 164610. [Read more]

Brand: Northern Industrial Welders

Northern Industrial Replacement Torch Cover for Plasma Cutter (Item# 164610), Model# 2.20.04.901

The Northern Industrial replacement torch cover works with the Northern Industrial Plasma Cutter Model 375, Item# 164610. [Read more]

Brand: Northern Industrial Welders

Hobart Handler 140 MIG Welder - 115 Volt, 140 Amp, Model# 500500

The Hobart Handler 140 MIG welder comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25-140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires. U.S.A. Volts: 115, Amps: 140, Duty Cycle: 20% at 90 Amps, 19V, Mig Ready: Yes, Wire Feed Speed Control: Yes, 40 - 700 IPM, Weldable Metals: Steel, stainless steel, and aluminum, Weld Thickness (in.): 24-gauge up to 1/4in. steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Optional, Welding Wire Diameter (in.): 0.023 - 0.035, Cart: No, Dimensions L x W x H (in.): 10 5/8 x 19 1/2 x 12 3/8 Proven built-in wire feeder with quick-release drive roll lever Built-in contactor eases use and is an excellent safety feature which makes wire electrically cold when not welding Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness... [Read more]

Brand: Hobart

Lincoln Easy MIG 140 Welder - 120 Volts, 140 Amps, Model# K2697-1

This Lincoln Easy MIG 140 welder uses common 120V power and is a fine choice for home projects, farm repairs or basic auto body work. It features simple 2-knob tapped control for easy set up of either gas-less flux cored welding or gas shielded MIG welding. Volts: 120, Amps: 140, Duty Cycle: 20% at 90 Amps, 19.5 Volts, Mig Ready: Yes, Wire Feed Speed Control: 50-500 IPM, Weldable Metals: Steel, aluminum, Weld Thickness (in.): Up to 5/16in. mild steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, when welding MIG, Welding Wire Diameter (in.): .025 to .045, Power Cord (ft.): 6, Cart: No, Dimensions L x W x H (in.): 18 5/8 x 10 1/8 x 14 [Read more]

Brand: Lincoln Electric